PO3 Fractal+ is a structural trading system built around three stacked HTF candle groups that auto-align to each other. On each group, it maps the PO3 cycle: detecting the fractal pattern, tracking the sweep, marking the CISD entry trigger, and projecting Fibonacci extension targets. A built-in Breaker Model and position sizer turn raw signals into executable trade plans — without switching tools.
What Makes It Different
Most PO3 indicators use a single HTF. PO3 Fractal+ runs three simultaneously. HTF 2 auto-aligns to the next timeframe above HTF 1, and HTF 3 to the next above HTF 2. You can override any of them manually. This gives you immediate multi-timeframe confluence without configuring each pair separately.
The Breaker Model runs on top of the HTF structure — it tracks when price sweeps a structural high or low, finds the Fair Value Gap within that move, and marks the breaker block zone that represents the expected re-entry region after the sweep. The built-in position sizer reads your entry and stop from the most recent signal and calculates contracts or units in real time using the correct contract specifications for 30+ futures instruments.
Key Features
Auto HTF Alignment
HTF 1 is selected automatically based on your chart timeframe. HTF 2 and 3 chain upward from there:
HTF 2 then takes the next step up from HTF 1, and HTF 3 the next step up from HTF 2. For example, on a 5m chart: HTF1 = 1H, HTF2 = 4H, HTF3 = 1D — automatically.
The Breaker Model
The Breaker Model runs on top of the fractal structure to identify institutional re-entry zones after a liquidity sweep:
1. Structural Sweep
Price sweeps a prior HTF candle high or low. The sweep candle and its context are logged.
2. FVG Identification
The FVG created within the sweep move is identified. When Require FVG for Setup is on, a setup is only registered if a valid gap exists within the structure.
3. Breaker Block Zone
A box is drawn over the breaker region — the area that represents likely support or resistance on a return. The FVG box marks the specific imbalance within the structure. The setup remains active until price either trades through the invalidation level or the block is consumed.
Three timeframes. One indicator.
PO3 Fractal+ is available exclusively to HSKY Suite members. Subscribe and get instant access across all your TradingView charts.
Get Access →How to Install
- Open TradingView and click Indicators.
- Navigate to Invite-Only Scripts.
- Add PO3 Fractal+ to your chart.
- For best results, use on a 1m–5m chart with all three HTF candle groups visible. The groups render to the right of current price.
General
Clean Mode
One toggle that collapses everything to the latest setup and sessions. Specifically: hides historical structure labels, FVGs, tables, open manipulation lines, and all but the latest fractal and sweep. Session boxes and HTF candles are always visible regardless. Reload the chart after toggling for cleanest results.
HTF Detection Mode
Auto: the HTF 1 timeframe is selected automatically from your chart timeframe (see the alignment table in the Overview).
Custom: enter any timeframe manually for HTF 1. HTF 2 and 3 will still auto-align upward from your custom input unless individually overridden.
Use Actual Day Change for Daily HTF
When enabled, daily HTF boundary detection uses a day-of-month comparison rather than a bar-change check. Use this if you notice daily candle splits at unexpected times on certain data feeds.
HTF Timeframes
HTF 1 / 2 / 3 — Enable & Max Candles
Each of the three groups can be individually enabled or disabled. Max candles per group is capped at 6. Candle width is independent per group (1–4, doubled internally for visual balance).
Auto-Align HTF 2 to HTF 1 / HTF 3 to HTF 2
When enabled, each group automatically selects the next timeframe in the chain above the previous group. Disable to manually enter any timeframe for that group. The auto-alignment chain is: 15m → 30m → 1H → 4H → 1D → 1W → 1M → 3M.
Candle Appearance
Body / Border / Wick Colors
Independent bull and bear colors for body, border, and wick. Default: green body / red-pink body. Borders and wicks default to white on both sides.
Padding & Spacing
Padding from current candles: offset between the rightmost LTF bar and the first HTF candle group.
Space between candles: gap between individual candles within a group (1–4).
Space between HTF groups: gap between each of the three groups (1–20).
HTF Timeframe Label & Timer
Each HTF group shows a label identifying its timeframe and a countdown to the next candle close. Both can be independently toggled, colored, and sized.
Price Labels
Optional price labels on the HTF candle bodies (off by default). Useful when analyzing levels on HTF candles directly in the mini-display area.
Fractal Detection
Fractal Bias Filter
Controls which fractal directions are detected and drawn:
Auto from HTF Sweep reads the direction of the previous HTF candle's sweep: if the prior candle swept a high, bearish fractals are detected; if it swept a low, bullish fractals are detected. This auto-aligns fractal detection with the most recent structural bias without manual switching.
Detect Fractals On
HTF1 Only: fractal detection runs only on the primary HTF group. Cleaner output with fewer signals.
All shown HTFs: fractal detection runs across all three active groups simultaneously. More signals, more confluence opportunities.
History & Sweep History
Set to 0 for unlimited history (show all detected fractals and sweeps). Any positive number caps the visible count. Reduce when the chart gets cluttered on lower timeframes with many historical structures.
Hide / Delete Fractals When Price Trades Against
When Hide is on, a fractal that price closes through in the opposite direction is faded rather than immediately deleted. When Delete is additionally enabled, the fractal is fully removed — keeping only the latest bull and bear fractal visible. The delete mode is the cleanest for live trading; the fade mode is useful for reviewing why past fractals failed.
Show Live Developing CISD / Fractals
Draws temporary CISD lines and fractal zones while the active HTF candle is still forming. These update on every tick and will repaint before candle close — they are leading signals, not confirmed ones. Disable if you only want to trade confirmed candle-close structures.
Fractal Labels
C2 / C3 / C4 Labels on Chart
Labels each fractal stage on the main price chart. C2 = the swing point (sweep candle close area). C3 = the expansion start. C4 = the follow-through candle. All three are labeled when detected.
Custom C2 Label Text
Replace the default C2 label text with your own. Set separate text for bullish and bearish C2. Useful if you use different notation than the default (e.g., "Bull Setup" vs "Bear Setup").
Fractal Labels on HTF Mini-Display
Shows C2/C3/C4 labels on the HTF candle mini-display to the right of price. These mirror the main chart labels but appear on the reconstructed HTF candles. Labels for bull and bear are independently configurable.
Sweep
HTF1 Sweeps on LTF Chart
Draws sweep lines from the swept candle's wick to the point where the sweep occurred — plotted directly on your LTF price chart. Each sweep line can include a TF label identifying which HTF the sweep originated from. HTF 2 and 3 sweep lines are intentionally off by default to keep the chart readable.
HTF Candle Sweeps (Mini-Display)
Additional sweep markers drawn on the HTF mini-display candles themselves, showing how each candle interacted with the prior one's high or low. Style, color, and right-extension configurable.
C1 Opposite Targets (TP)
After a high sweep, the C1 low is plotted as a take-profit reference — and vice versa. These represent the opposing extreme of the sweep candle and are common first targets in the model. Toggle Latest Only to show only the most recent target and remove older TP lines.
Pro-Trend vs Counter-Trend Sweep Style
Sweep lines that originate from a calculated midpoint (pro-trend) use a separate line style from wick-to-wick sweeps. This lets you visually distinguish the two types at a glance without reading labels.
Failed Sweep
When a sweep is detected but price does not follow through (the setup fails), the sweep line is converted to the failed sweep style (default: gray dotted). Failed sweeps remain visible as reference points unless Clean Mode is active.
Open Manipulation Lines
Optional lines drawn at the HTF candle open that extend until the candle closes. These mark where institutions may initiate manipulation moves relative to the session open. Off by default and hidden in Clean Mode.
Sessions & Killzones
Session Boxes
Asia, London, NY AM, and NY PM session ranges rendered as boxes. Toggle each session independently and set custom session times. Box fill transparency is adjustable (default 90% — nearly invisible, border only visible). Session history shows up to 50 prior sessions.
Session Timezone
All session times are interpreted in the specified timezone (default: America/New_York). Change this if you trade in a different timezone and want sessions to display in your local time. Note: session times are always stored as New York time in ICT methodology — changing the timezone here shifts the visual display, not the underlying session logic.
Breaker Model
Enable Breaker Model
Master toggle. When on, the indicator tracks structural sweeps and attempts to identify the breaker block zone from the FVG created within the sweep move.
Require FVG for Setup
When enabled, a breaker block is only registered if a valid Fair Value Gap is found within the structural move. This is the recommended setting — it filters out lower-quality sweeps that don't have a clear imbalance. When off, any confirmed sweep creates a breaker setup.
Use Sweep Extreme as Stop
Defines the stop loss reference for the breaker setup. When on, the stop is placed at the extreme of the sweep candle (the wick tip that broke the level). When off, the stop is placed at the far edge of the breaker box.
Max Breaker Setups
Set to 0 for unlimited. Any positive number caps visible setups (older setups are removed as new ones form). In Clean Mode, this is automatically capped at 1 — only the most recent breaker is shown.
Enable FVG ATR Filter
Applies an Average True Range multiplier filter to the FVG. FVGs smaller than the ATR multiplier are rejected as too tight for a valid breaker setup. Useful for filtering out noise on volatile instruments or lower timeframes.
Breaker Box Length / FVG Box Length
Breaker Box Length: set to 0 to extend the breaker box to the current bar continuously. Any positive number fixes its width in bars.
FVG Box Length: how many bars the FVG box extends. Default is 5 bars (approximately 5 candle widths).
Use Session Levels as Breaker Triggers
When enabled, session highs and lows (Asia, London, etc.) can also act as breaker trigger levels — not just HTF candle extremes. Expands the number of potential setups in range-bound or session-driven markets.
HTF Imbalances & FVG
Fair Value Gaps
Draws FVG boxes on the HTF mini-display candles. These are the three-candle imbalances (gap between candle 1's extreme and candle 3's extreme). The midpoint line can optionally be shown. Both the FVG boxes and midpoint line are hidden in Clean Mode.
CISD & Fib Projections
CISD Lines
Draws the Change in State of Delivery level on confirmation. Bull CISD defaults to green, bear to red. Show All CISD Lines keeps historical CISD levels visible alongside the current one. CISD Invalidation Trigger controls whether a wick or a close is needed to invalidate a CISD level.
CISD Hunt Projection
When a C2 label appears (a potential CISD setup is being tracked), a dotted placeholder line is drawn at the structural extreme — showing where the CISD level will be if price confirms. When the break happens, the dotted line converts to the solid CISD line. If the setup fails, the placeholder is removed. This helps you anticipate the CISD level before it's confirmed so you can prepare your order.
Fib Extension Levels
Enter a comma-separated list of extension levels (e.g. 1, 2, 2.5, 3, 4). Each level gets an independent line drawn from the CISD anchor. Lines are labeled on the right or left side of the screen. Common usage: 1 = initial target, 2 = primary target, 2.5/3 = extended target, 4 = maximum extension.
Trigger Fib On
Controls when the Fib projection is drawn:
Use CISD if you enter at the CISD break. Use Confirmation if you wait for a follow-through candle. When set to Both with Keep Both Fibs enabled, both sets remain visible simultaneously — useful for comparing projection ranges from different entry points.
Max Projection Sets
How many Fib projection sets to keep visible at once (1–4). Older sets are removed as new ones are drawn. Set to 1 in Clean Mode automatically.
LTF Chart Overlays
HTF1 Period Start Line
A vertical line drawn at the start of each HTF 1 candle on your LTF chart. Marks the boundary between HTF periods. Style, color, and width configurable.
HTF1 Midpoint Lines
Horizontal lines at the midpoint of each HTF 1 candle, extending across the LTF chart. Useful for identifying the equilibrium level of the HTF candle as a potential support/resistance reference.
Clean Mini-Display Helper Lines
Removes the structural helper lines from the HTF mini-display area (e.g., dividers and reference lines between groups). Activates automatically in Clean Mode.
Position Sizing
The position sizer reads the entry and stop from the most recently confirmed signal and calculates your position size in real time.
Account Balance & Risk Type
Enter your account balance in USD. Set risk as a Percentage (e.g., 1%) of the balance or a Fixed Amount in dollars. The sizer will calculate the maximum contracts or units you can take for that risk given the entry-to-stop distance.
Using Prop Firm
Toggles between prop firm contract sizing (contracts counted as units of 1) and standard exchange contract sizing (uses the instrument's actual dollar-per-point value). Enable this when trading on a prop firm account — the math is the same but the contract representation differs.
Supported Instruments
The sizer includes built-in contract specifications for:
For instruments not in the list, the sizer defaults to 1 unit per point and calculates accordingly.
Get Access to PO3 Fractal+
Available exclusively to HSKY Suite members. Subscribe and start using it on your TradingView charts today.
View Pricing →